![\"At\u0131k](\"https:\/\/www.recycle-plant.com\/wp-content\/uploads\/2018\/10\/Waster-Plastic-granulation-extruder6.jpg\")
<\/figure> 1, plastik pelet makinesi<\/strong> ev s\u0131cakl\u0131k kontrol\u00fc<\/h3> Plastic wire and cable insulation and jacket extrusion are characterized by viscous flow based on thermoplastic deformation. <\/p>
In addition to the required plastic pellet machine screw and external heating barrel, the plastic melt is extruded, and the screw extrusion plastic itself is heated, the temperature requirements of the host should be considered in general, therefore, should not only consider the heater heating on and off Also consider the factors that cool the hot screws. <\/p>
The plastic pellet machine requires correct and reasonable determination of the position and installation method of the thermocouple of the measuring component. The reading from the temperature control meter can reflect the actual temperature of the component. <\/p>
The accuracy and system of the temperature control instrument should be well matched, and the stability of the temperature control system of the whole plastic pellet machine can meet the requirements of various plastic extrusion temperatures.<\/p>
2, plastik pelet makinesi vida h\u0131z\u0131 kontrol\u00fc<\/h3>
An important technical requirement for plastic pelletizers to adjust screw speed and stability is host transfer. The screw speed directly determines the quantity and speed of the product. <\/p>
To achieve high yield in normal production, it is necessary to achieve the speed required for the screw speed requirement of the plastic pellet machine. <\/p>
Since the fluctuation of the rotational speed will cause fluctuations in the quality of the impact extrusion, a change in the diameter of the cable will occur if the linear velocity of the traction does not change.<\/p>
3, plastik pelet makinesi<\/strong><\/a> \u00e7ap kontrol\u00fc<\/h3> As mentioned above, in order to ensure the diameter of the product cable, in addition to the need to control the core (core) dimensional tolerances, extrusion temperature, screw speed, and a traction device, it should also ensure control of line speed and outside diameter measurement. <\/p>
In plastic pellet machine equipment, the cable outer diameter should be tested at any time, and the traction or screw speed is adjusted by the feedback of the error signal, and the correct diameter is exceeded.<\/p>
4, plastik pelet makinesi<\/strong> makara gerilim kontrol\u00fc gereksinimlerini elde etmek i\u00e7in<\/h3> Farkl\u0131 hat h\u0131zlar\u0131nda bo\u015f diskten \u00e7al\u0131\u015fmak i\u00e7in gereken s\u00fcrekli gerilimin sa\u011flanmas\u0131 amac\u0131yla, kablolama cihaz\u0131n\u0131n tel gerilimi ayarlama mekanizmas\u0131n\u0131n al\u0131nmas\u0131 veya sabit hat h\u0131z\u0131n\u0131 ve sabit gerilim sarg\u0131s\u0131n\u0131n elektrik sistemini dikkate almak arzu edilir.<\/p>","protected":false},"excerpt":{"rendered":"
Learn how the control system of a plastic pellet machine production line manages heating, transmission, cooling, temperature, pressure, screw speed, product diameter, and winding tension. This overview explains key control functions that support stable extrusion, consistent output quality, and automatic or coordinated operation throughout the plastic pelletizing process.<\/p>","protected":false},"author":1,"featured_media":222,"parent":0,"template":"","tags":[64],"info-type":[3],"class_list":["post-452","info","type-info","status-publish","has-post-thumbnail","hentry","tag-plastic-pellet-machine","info-type-knowledge-base"],"taxonomy_info":{"post_tag":[{"value":64,"label":"plastic pellet machine"}],"info-type":[{"value":3,"label":"Knowledge Base"}]},"featured_image_src_large":["https:\/\/www.recycle-plant.com\/wp-content\/uploads\/2018\/10\/Waster-Plastic-granulation-extruder6.jpg",720,540,false],"author_info":{"display_name":"Ella","author_link":"https:\/\/www.recycle-plant.com\/tr\/author\/admin\/"},"comment_info":"","_links":{"self":[{"href":"https:\/\/www.recycle-plant.com\/tr\/wp-json\/wp\/v2\/info\/452","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.recycle-plant.com\/tr\/wp-json\/wp\/v2\/info"}],"about":[{"href":"https:\/\/www.recycle-plant.com\/tr\/wp-json\/wp\/v2\/types\/info"}],"author":[{"embeddable":true,"href":"https:\/\/www.recycle-plant.com\/tr\/wp-json\/wp\/v2\/users\/1"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.recycle-plant.com\/tr\/wp-json\/wp\/v2\/media\/222"}],"wp:attachment":[{"href":"https:\/\/www.recycle-plant.com\/tr\/wp-json\/wp\/v2\/media?parent=452"}],"wp:term":[{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.recycle-plant.com\/tr\/wp-json\/wp\/v2\/tags?post=452"},{"taxonomy":"info-type","embeddable":true,"href":"https:\/\/www.recycle-plant.com\/tr\/wp-json\/wp\/v2\/info-type?post=452"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
As mentioned above, in order to ensure the diameter of the product cable, in addition to the need to control the core (core) dimensional tolerances, extrusion temperature, screw speed, and a traction device, it should also ensure control of line speed and outside diameter measurement. <\/p>
In plastic pellet machine equipment, the cable outer diameter should be tested at any time, and the traction or screw speed is adjusted by the feedback of the error signal, and the correct diameter is exceeded.<\/p>