Bidhaa za plastiki huleta urahisi mwingi kwa uzalishaji na maisha yetu. Hii ni upande mzuri. Kwa upande mwingine, husababisha mojawapo ya vyanzo vikubwa vya uchafuzi katika maisha yetu. Haitaharibika kwa kawaida, na mashine ya pellet ya plastiki imetatuliwa vizuri. Uchafuzi huu umetambua kuchakata tena plastiki taka

Extruder ya granulation ya plastiki ya taka

Hur förnyas avfall av plast i maskin för plastpellets? Låt oss ta en närmare titt

After the plastic is added to the hopper, the hopper falls smoothly onto the screw and is bitten by the screw thread. As the screw rotates, the thread is forced to advance toward the head to form a mechanical conveying process.

When the plastic is running from the feeding port to the pelletizer machine head, the thread depth of the screw is gradually reduced, and due to the resistance of the filter screen, the manifold and the head, high pressure is formed during the plasticizing process, and the material is pressed very much.

Tätning förbättrar dess ledningsvärme och hjälper plasten att smälta snabbt. Samtidigt orsakar det gradvis ökande trycket att gasen som ursprungligen fanns mellan pelletsarna avlägsnas genom ventilhålet.

Plastic pellet machine with hopper and screw extruder for recycling waste plastic

While the pressure is rising, the plastic is heated on the one hand by the outside. On the other hand, during the movement of compression, shearing, and agitation, the plastic itself generates a large amount of heat due to internal friction.

Under the combined action of external force and internal force, the plastic The temperature gradually increases, and its physical state also undergoes a change in the glass state, a high elastic state, and a viscous flow state.

Generally speaking, in the feeding, the glass state is mainly in the middle portion of the compression section where the screw thread is gradually reduced, the material is mainly in a high elastic state, and gradually melts, and the material is in a viscous state at the rear and the squashing section of the compression section.

This is that the plastic has been completely plasticized, and the plasticized plastic is pressed, quantitatively and uniformly continuously extruded from the machine head by screw inference.