Plastic pellet making machine
Plastic pellet making machine is widely used in the granulation of PET sheet, HDPE, LDPE, PP, and other plastic films after washing. Plastic pellet making machine has a very promising future, not only for it can improve the environment but also bring large profits to us in the market.
The video shows the plastic pelletizing machine’s working process. If interested, send us a message by the website form. We will introduce you more machine models and details.
Characteristics of plastic pellet-making machine:
- The forced feeding hopper is adapted for uniform feeding, labor saving, and high output. The machine can work efficiently in a plastic recycling line.
- Electromagnetic heating is adopted in the feeding section and plasticizing section of the main machine. Both dry and wet plastic materials can be granulated through this granulator.
- The screw was designed exquisitely after research and development, the whole machine and all parts are assembled and equipped reasonably, the circuit adopts three-phase with one neutral wire.
- Screw of the granulator is designed in accordance with the characteristics of the raw material. The pellet-making machine is of high output, and the finished products are of good luster and are of full and plump appearance. With the configuration enhanced, the service life of the pelletizer equipment is profoundly prolonged.
- The plastic granulating machine has the characteristics of a high yield of low energy consumption, large torque reducer and a motor. With a specially designed screw with, no dead angle and no material congestion are ensured, the production capacity is effectively improved, and the plastic plasticizing effect is increased. Single and double exhaust structures are all available. Dry, wet materials, materials can be fully drained and exhausted to ensure the ideal pelletizing effect of producing firm and full particles.
- High-quality electrical drive equipment ensures the safe and reliable operation and working of the plastic pellet-making machine.
The recycling of waste plastic raw materials has a very important position in the entire waste plastics processing industry chain.
How do we grasp the quality of recycled materials?
At present, the most important solution to the problem of heating and energy saving in plant, Plastic pellet making machine is high-frequency electromagnetic heating equipment. With the further development of the industry, high-frequency electromagnetic heating will become the mainstream heater in the future. Heating equipment has a very prominent leading position in the industry, its thermal efficiency reaches 98%, energy-saving effect reaches 70%, and it is assembled with ordinary workshops.
Compared with the frequency heater, it has high intelligence, can be controlled by remote control of data lines, controlled by the microcomputer and has multi-level menus, multiple protections, beautiful appearance, reliable performance, and guaranteed after-sales.
Prospects for the plastic pellet-making machine machinery industry
The plant, plastic pellet making machine can not allow the existence of pores for the insulation layer, especially the thin layer insulation. The core can completely remove the moisture and oil on the surface by preheating before high temperature. For jacket extrusion, its main function is to dry the core to prevent the possibility of voids in the jacket due to moisture. Preheating also prevents the internal pressure of the plastic from being quenched during extrusion.
In the plant, Plastic pellet making machine process, preheating can eliminate the cold temperature entering the high-temperature machine head, and the disparity temperature difference formed when the mold is in contact with the plastic, avoiding the fluctuation of the plastic temperature and causing the fluctuation of the extrusion pressure, thereby stabilizing the extrusion. The quantity is guaranteed to ensure the quality of the extrusion.
The electric heating core preheating device is used in the plastic granulating unit, which requires sufficient capacity and ensures rapid heating so that the core preheating and the core drying efficiency are high. The preheating temperature is limited by the speed of the discharge line and is generally similar to the temperature of the head.
When recycling plastic raw materials, manufacturers of the plant, Plastic pellet making machines should check whether the packaging materials have been packaged with toxic and harmful chemical raw materials and can be produced. Otherwise, not only will the environment be seriously polluted, but it will also lose money. Therefore, this recycling machine plays an indispensable role in the industry.